-26-
Fig.2-2
Moving of Slot D
Slot D
C
y
x
Slot D
Optical Adjustments
White
White
1
Turn the projector on by a state of without FPC cables.
2
Project all of lights on the screen.
3
Adjust the adjustment base of integrator lens assy to make color
uniformity in white.
1) If the shading appears on the left or right of the screen as shown
in
Fig.2-1
, loosen 1 screw
A
, and adjust the slot
B
to make
color uniformity in white by using a slot screwdriver.
2) If the shading appears on the top or bottom of the screen as
shown in
Fig.2-2
, loosen 2 screws
C
, and insert a slot screw-
driver into the slot
D
and adjust color uniformity in white by turn-
ing a slot screwdriver up or down.
4
Tighten screws
A
and
C
to fix the Integrator lens unit.
Note:
The relay lens adjustment must be carried out after completing this
adjustment.
Integrator lens adjustment
a
Moving of slot B
Fig.2-1
Slot B
A
a
b
y
x
b
Summary of Contents for PLC-XC55
Page 69: ... 69 IC Block Diagrams FA7701 DDC Control IC7841 IC5601 TH7347 Signal Switch IC9884 ...
Page 70: ... 70 IC Block Diagrams FA7703 DC DC Converter IC7811 Pedestal Voltage FA5550 P F Control IC6 1 ...
Page 73: ... 73 IC Block Diagrams NJM2671 Motor Driver IC5541 NJW1156 Audio Control IC5001 ...
Page 102: ... KK7AC JULY 2008 DC 300 Printed in Japan SANYO Electric Co Ltd ...
