Sanyo PLC-WXU700A, Owner'S Manual, Page: 265 / 393

26
Chapter 3 Names and functions of the operating screen
E
Start real time capture button
Capture (Project) the computer screen in real time. After the execution of "Start real time capture",
the application window disappears. • • •
V
G One-shot capture button
Copy and capture (project) the computer screen without modification. After the execution of One-
shot capture, the application window disappears. • • •
V
L
Terminate capture button
Terminate the real time capture and the One-shot capture.
H
Select capturing object button
It is possible to designate the window to capture individually. This button is disabled by default,
so the full screen is captured. It is possible to change the capturing object function setting at
parameter settings. For detail, refer to "Parameter set up" (p.90).
<
Wireless easy setting button / Wireless easy release button
Configure the Wireless LAN setting just by clicking this button. (The setting will be stored as AdHoc
system) For details, refer to "5. Wireless LAN configurations"-->"Easy wireless setting" (p.41). To
restore the easy setting, press the Wireless easy release button.
B Parameter setup button
Activate the parameter setup window, and execute the connections setting and the image setting.
For detail, refer to "Parameter set up" (p.90).
V
To show the application window again, refer to the item "Commands on the menu bar" (p.89).
Using the multiple network adaptors
When your computer provides multiple network adaptors, the network adaptor selecting window will
appear each time the Network Capture 5 software starts. Select a network adaptor and check the "Set
network adaptor as default" and then click OK. To change the setting, refer to the item "Parameter set
up" (p.90).