Sanyo PLC-WXU700A, Owner'S Manual

Page: 214 / 393

129
In the automatic displaying mode [Auto], when the left-click on the remote control is pressed, automatic displaying
stops and the manual displaying mode is set. When the right-click is pressed, automatic displaying restarts.
The image data used for this function is the program or folder that the Network Viewer function used last time. The
projector cannot specify particular images or file servers itself.
The display time is greatly affected by the network environment or the operation of multi control, so the image
display may not be displayed as it is set for the specified display time.
2
Select "Display mode" and press SELECT button, and then select "Auto" or "Manual" and then press
SELECT button.
When selecting "Auto", set "Display length", "Endless play" and "Repeat times"
3
Select "Connect" and then press SELECT button to start displaying. The images in the FTP server are
displayed on the screen.
It enables you to browse the images by using the control buttons (
S
,
T
) on the remote control or on the
projector.
S
: Previous image display,
T
: Next image display
4
To stop the display, select "Disconnect" and then press SELECT button.
Item Description
Display mode..........Sets display periods and repeating times
Auto ....................Displays image automatically by setting "Display length" and "Repeat times"
Manual ...............Controls image display (browsing image backward or forward) manually.
Display length.........Display time of image (3 to 240 sec.)
Endless play.............Sets "On" to play continuously
Repeat times ...........Repeat times (255 times maximum)
"0" is displayed when "Endless play" is set to "On".
Using the network viewer function
Display length
Repeat times