35
Computer Input
Computer Input
When the D.ZOOM + (
▲
) is pressed, the On-Screen
Menu disappears and the message "D. zoom +"
is displayed. Press the D.ZOOM
▲
or the SELECT
button to expand the image size. And press the Point
▲▼◄►
buttons to pan the image. The Panning
function can work only when the image is larger than
the screen size.
Digital zoom +
When D.ZOOM – (
▼
)
is pressed, the On-Screen
Menu disappears and the message "D. zoom –" is
displayed. Press the D.ZOOM
▼
or the SELECT button
to compress image size.
This is used to reducing the size into original size.
To exit the Digital zoom +/– mode, press any button
except the D.ZOOM
▲▼
buttons, SELECT, and Point
buttons.
To return to the previous screen size, select a screen
size from the Screen Size Adjustment or select an input
source from the Input Source Selection (p.26) again, or
adjust the screen size with the D.ZOOM
▲▼
buttons.
Digital zoom –
For zooming in and out the images
Remote Control
D.ZOOM + button
POINT buttons
SELECT button
D .ZOOM - button
Note:
• T h e p a n n i n g f u n c t i o n m a y n o t
operate properly if the stored Mode
in the PC Adjust Menu is used.
(p.30)
• True, Full, and Digital zoom +/–
cannot be selected when 480i, 575i,
480p, or 575p is selected in the PC
System Menu (p.28).
• Digital zoom +/- cannot be selected
when Full or True is selected.
• Digital zoom - cannot be operated
when Custom is selected.
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the “Custom” is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V .................. Adjust the Horizontal/Vertical screen
scale.
H&V ........................... When set to “On,” the aspect ratio
is fixed. The “Scale V” appears
dimmed and becomes unavailable.
Adjust “Scale H,” then the screen
scale is automatically modified
based on the aspect ratio.
Position H/V .............. Adjust the Horizontal/Vertical screen
position.
Common ................... Save the adjusted scale to all the
inputs. Press the SELECT button at
Common to display a confirmation
box. To save the scale, press the
SELECT button at “Yes.” When
Custom is selected, the saved scale
is used.
Reset ......................... Reset the all adjusted values. Press
the SELECT button at Reset to
display a confirmation box. To reset,
press the SELECT button at “Yes.”
Custom
Notes:
• When no signal is detected,
“Normal” is set automatically
and the Aspect dialog box
disappears.
• The adjustable range for Scale
H/V and Position H/V is limited
depending on the input signal.
Press the SELECT button
at Common or Reset, to
display a confirmation
box.
