Sanyo PLC-WXU30A - 3700 Lumens, Owner'S Manual

Page: 123 / 144

123
1. Click
Start
button to start the auto-display. The image in the selected folder or program is dis-
played on the projector's screen. The web browser opens another window and displays the pre-
view images on the Auto Control window sequentially.
2. Click
Stop
button to stop the auto-display.
• Restart the auto-display, click
Restart
button.
* When the auto-display stops, it enables you to display the images manually by using
[<<]
or
[>>]
button.
3. Click End button to end the auto-display.
• When the Error button is pressed, the further information of the file error is displayed.
For further error information, refer to the next page.
Display time*
1
of the
image (3 to 240 sec.)
Repeat times
(0 to 255 times)
* 0 means endless play
Click here to check the
further information of
the file error
4
Auto Display setting and control page [3]
Error info.
*1 When the program file for auto-display is selected, the display time of each image gives preference to the
setting specified by the program file over the setting specified by the auto-display function above. The
images for which the display time is not set shows the display time specified by the auto-display function
above.
✐
The display time is greatly affected by the network environment or the operation of multi control, so the
image may not be displayed as the specified display time.
✐
The timing to switch images is not the same on the screen and on the web browser.
✐
The preview image will not
appear when the option is set
"Display OFF".(
+
p.121)
Using the network viewer function