Sanyo PLC-WXL46A, Owner'S Manual

Page: 83 / 159

14
Chapter 2 Setup Procedures
The Network PIN code is to restrict the access from the networks to the projector.
After setting the Network PIN code, you need to enter it to operate the projector via the
networks.
Network PIN code
Network information
1. Select "Network PIN code" menu, and press SELECT button.
The Network PIN code screen will appear.
2. Set the Network PIN code.
Set the figures with the Point
54
buttons and move to the next items with the Point
buttons. Select “Set” and press SELECT button to set. To cancel the preset Network PIN
code, select “Cancel”. When you do not want to set the Network PIN code, set "0000".
It is recommended to set the Network PIN code if you use the projector via the networks.
The Network PIN code can be set also through the networks. See “3. Basic setting and
operation”
“Initial setting” “Network PIN code setting” (p.23).
Select "Network information" from the projector menu and press SELECT button to show
LAN setting environment of the currently selected projector. (The description below is an
example and different from what will be shown.)
Wired factory default
Network information
Network PIN code
Network PIN code screen
Network information
MAIN PROGRAM: V1.000
MAC ADDRESS: 08007B650056
IP ADDRESS: 172.021.095.202