Sanyo PLC-WXL46, Owner'S Manual

Page: 26 / 68

The Auto PC Adjustment
function operates to adjust
the projector.
PC System Menu
The PC System Menu icon
The selected system is
displayed.
Available system selection.
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
frame pointer to the PC System Menu icon.
Use the Point ▲▼ buttons to move the red arrow
pointer to the desired system, and then press the
SELECT button.
1
2
PC System Menu
Custom Mode (1–5) set in the
PC Adjust Menu (pp.28-29).
PC system can also be selected manually.
Computer System Selection
The projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA,
or UXGA with its Multi-scan system and Auto PC Adjustment. If computer is selected as a signal source, the
projector automatically detects the signal format and tunes to project proper images without any additional
setting. (Signal formats provided in this projector is shown on page 62.)
One of the following messages may appear when:
The projector cannot recognize the connected
signal conforming to the provided PC Systems.
“Auto” is displayed on the PC System Menu
icon and the Auto PC Adjustment function works
to display proper images. If images are not
projected properly, adjust manually. (pp.28–29)
There is no signal input from computer. Check
the connection between your computer and the
projector. (See “Troubleshooting” on page 56.)
Auto
-----
The preset system is manually adjusted in the
PC Adjust Menu. The adjusted data can be
stored in Mode 1–5 (pp.28–29).
Mode 1
A PC System provided in the projector is
selected. The projector selects a proper system
provided in the projector and displays it.
SVGA 1
Selectin� Computer System Manually
*Mode 1 and SVGA 1 are examples.
6
Computer Input