Sanyo PLC-WXE46A, Service Manual

Page: 44 / 110

-44-
Electrical Adjustments
Group/
Item
Item Name Function Initial Range Note
0 Temp A Warning Offset
(Time)
Offset of Temp Error (Minutes)
Error Setting Value is increased X
minute at the below condition
* Standby
* Right to turn on the lamp
*Right to change the Lamp mode
3 0-100
1 Temp B Warning Offset
(Time)
3 0-100
Temp C Warning Offset
(Time)
3 0-100
3 Temp B-A Warning Offset
(Time)
3 0-100
4 Temp C-A Warning Offset
(Time)
3 0-100
Group
254
Fan Control Range Setting (temp./Voltage)
Normal Ceiling HiLand-
Normal
HiLand-
Ceiling
10 Normal Fan Control Min
Temp
Temp Senser Control Start/End Tem.
p at Normal
46 45 39 38 0-100
11 Normal Fan Control Max
Temp
50 49 44 43 0-100
1 Normal Fan1 Min
Fan voltage value at Normal (unit:
0.1V)
7 7 115 115 0-55
13 Normal Fan1 Max 135 135 135 135 0-55
14 Normal Fan Min 80 80 110 110 0-55
15 Normal Fan Max 130 130 130 130 0-55
0 Eco Fan Control Min Temp
Temp Senser Control Start/End Tem.
p at Eco
46 45 39 38 0-100
1 Eco Fan Control Max Temp 50 49 44 43 0-100
Eco Fan1 Min
Fan voltage value at Eco (unit: 0.1V)
5 5 100 100 0-55
3 Eco Fan1 Max 115 115 10 10 0-55
4 Eco Fan Min 65 65 75 75 0-55
5 Eco Fan Max 85 85 91 91 0-55
Group
255
Fan Start/Cooling Setting
0 Fan1 Initial Volt
Fan Start Voltage (0.1V)
70 0-55
1 Fan Initial Volt 70 0-55
4 Fan1 Cooling Speed Fan Voltage at Power Off (0.1V) 100 0-55
5 Fan Cooling Speed 100 0-55
8 Cooling Time L1
Cooling Time stting at Fan Mode L1 (x
30 sec)
1: 30, 3: 90, 15: 450 sec.
3 1-15
9 Cooling Time L
Cooling Time stting at Fan Mode L (x
30 sec) 1: 30, 3: 90, 15: 450 sec.
4 1-15
10 Temp Error Cooling Time
Cooling Time setting at Temp Erro (x
30 sec)
4 1-15
11 OnStart Cooling Start
Threshold
38 0-100
1 After shutdown cooling Cooling after shutdown (0: No, 1: Yes) 1 0-1
Group
256
Fan Lamp Voltage down Setting
0 Lamp Voltage
Current Lamp Voltage (0.1V)(Read
only)
- 0-55
1 Lamp Vol Threshold
Threshold to judge Lamp Voltage
Down ( V×10)
0 30-90
Fan1 Speed Gain
Additional Fan Speed of Min at Lamp
Voltage Down (unit: 0.1V)
10 0-55
3 Fan Speed Gain 10 0-55
Group
257
Fan dimmer Setting
0 Dimmer Average Chech
Period
Dimmer Average measurement Time
(0:10sec. 1:30sec. :60 sec. 90:
sec...10:30sec.)
1 0-10
1 Dimmer Average Dimmer Average Value (Read only) -
Last Voltage Difference -
3 Voltage Difference Goal -
Group
258
FAN network mode IC temp.
0 Standby Cooling Check
Cycle
Standby Cooling Check Cycle 5 -
1 Standy Cooling Start
Threshold
Standy Cooling Start
Threshold
55 -
Standby Cooling Enable Standby Cooling Enable 1 -
Group
260
Auto Calibration (Common)* Auto Calibration
0 Execute Calibration 0 0-1
Executes Auto-Calibration when
changiing the Value (PC White
100%)