background image

34

VIDEO INPUT

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the desirable image size.

Press MENU button and ON-SCREEN MENU will appear.  Press
POINT LEFT/RIGHT button(s) to move a red frame pointer to
SCREEN Menu icon.

Press POINT DOWN button and move a red frame pointer to the
function that you want to select and then press SELECT button.

1

2

NOTE : SCREEN Menu cannot be operated when

“720p,” “1035i,” or “1080i” is selected on AV
SYSTEM Menu (P31).

Move the red frame to the function and
press SELECT button.

SCREEN MENU

SCREEN Menu icon

Provides image at a wide screen ratio of 16 : 9.

Wide

Provides image at a normal video aspect ratio of 4 : 3.

Normal

3

To store the adjustment data, move a red frame pointer to Store
icon and press SELECT button.  Image Level Menu will appear.
Move a red frame pointer to the Image Level 1 to 4 and then
press SELECT button.

Image Level Menu
Move a red frame pointer to
the image icon to be set
and then press SELECT
button.

Store icon

Reset all adjustment to previous figure.

Reset

Store

Closes IMAGE MENU.

Quit

Other icons operates as follows.

Summary of Contents for PLC-SU32

















































Reviews: