Sanyo PLC-SU32 Owner'S Manual Download | Manualshive

Page: 19 / 48

background image

19

BASIC OPERATION

TURNING ON PROJECTOR

Connect the projector's AC Power Cord into an AC outlet. LAMP
Indicator lights RED, and READY Indicator lights GREEN.

Press POWER ON-OFF button on Top Control or on Remote
Control Unit to ON. LAMP Indicator dims, and Cooling Fans
start to operate. Preparation Display appears on a screen and
the count-down starts. The signal from PC or Video source
appears after 30 seconds.

2

3

TURNING OFF PROJECTOR

Press POWER ON-OFF button on Top Control or on Remote
Control Unit, and a message "Power off?" appears on a screen.

Press POWER ON-OFF button again to turn off the projector.
LAMP Indicator lights bright and READY Indicator turns off.
After the projector is turned off, Cooling Fans operate (for 90
seconds). During this "Cooling Down" period, this appliance
cannot be turned on.

1

2

TO MAINTAIN THE LIFE OF LAMP, ONCE YOU TURN
PROJECTOR ON, WAIT AT LEAST 5 MINUTES BEFORE
TURNING IT OFF.

TURNING ON / OFF PROJECTOR

When WARNING TEMP. Indicator flashes red, the projector is automatically turned off. Wait at least 5 minutes before
turning on the projector again.
When WARNING TEMP. Indicator continues to flash, follow procedures below:
1. Press POWER ON-OFF button to turn a projector off and disconnect AC Power Cord from an AC outlet.
2. Check Air Filters for dust accumulation.
3. Clean Air Filters. (See "AIR FILTER CARE AND CLEANING" section on page 40.)
4. Turn the projector on again.

If WARNING TEMP. Indicator should still continue to flash, contact the sales dealer where you purchased this projector or
service center.

1

Complete peripheral connections (with Computer, VCR, etc.)
before turning on projector. (Refer to "CONNECTING
PROJECTOR" on pages 11~13 for connecting the equipment.)

3

When projector has cooled down, READY Indicator lights
GREEN again and you can turn the projector on. After cooling
down completely, disconnect AC Power Cord.

30

Preparation Display disappears after 30 seconds.

Power off?

Message disappears after 4 seconds.

When “Power Management” function is ON, projector detects signal interruption and turns off Projection Lamp automatically.
Refer to “Power management” on pages 36.

NOTE : When “On start” function is ON, this projector is turned

on automatically by connecting AC Power Cord to an
AC outlet. (Refer to pages 35, 36.)

«
...
17
18
19
20
21
...
»

Summary of Contents for PLC-SU32

















































Reviews:

No comments

Related manuals for PLC-SU32

Brand: Eiki Pages: 79

Brand: Da-Lite Pages: 8

Reflection VX-3C

Brand: Runco Pages: 129

Insta-DE Screen

Brand: Elite Screens Pages: 8

Ritzscreen V540

Brand: Verano Pages: 12

Brand: InFocus Pages: 1

Brand: Epson Pages: 91

Brand: Epson Pages: 99

Brand: Epson Pages: 2

Brand: Epson Pages: 2

Brand: Epson Pages: 2

Brand: Epson Pages: 2

Brand: Epson Pages: 2

Brand: Epson Pages: 2

Brand: Epson Pages: 2

Brand: Epson Pages: 2

Brand: Epson Pages: 6

Brand: Epson Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands