39
PC System Menu
1
2
Custom Mode
(1~50) set in the
PC Adjust Menu.
(p42, 43)
This projector automatically tunes to various types of computers
based on VGA, SVGA, XGA, SXGA, UXGA, or WXGA with its Multi-
scan system and Auto PC Adjustment. If Computer source is
selected in the Source Select Menu, this projector automatically
detects the signal format and tunes to project a proper image
without any additional setting. (Signal formats provided in this
projector is shown on page 72~73 )
When the projector has difficulty in recognizing the connected
signal conforming to PC Systems provided in this projector,
several systems are displayed. Select one from them manually.
When the image is not projected properly, manual adjustment is
required. (p42~43)
There is no signal input from computer. Check the
connection of your computer and the projector. (See
" Troubleshooting" p70)
-----
✔
Note:
The projector may display one of the following messages.
User preset system manually adjusted in PC Adjust
menu. Adjustment data can be stored in Mode 1–50.
(p42~43)
Mode 1
*SVGA 1 and Mode 1 are examples.
selects system of the connected computer and video source.
PC Systems provided in the projector. The projector
chooses a proper system and displays it.
SVGA 1
Press the MENU button to display On-Screen Menu. Spin
the menu icons with the Control pad and press the SELECT
button when the SYSTEM icon comes right in front.
Move the yellow frame pointer with the Control pad to a
proper system, and then press the SELECT button.
The system being selected.
PC System Selection
Selecting PC System Manually
Auto
System
System
System
System icon
