COLOUR SYSTEM SELECT (VIDEO MODE)
This projector is compatible with the four major broadcast video standards: PAL, SECAM, NTSC or NTSC 4.43
(COLOUR SYSTEM
S
). It automatically adjusts itself to optimize its performance for the incoming video. However, if
the video signal is not strong enough to detect the video format, the projector may not reproduce the proper video
image. In case this happens, this projector allows you to choose a specific broadcast signal format.
Connect the video equipment and the PROJECTOR, and turn them on.
2. Set MODE SELECT to “VIDEO MODE”.
3. Press the MENU
and the MAIN MENU DISPLAY dialog box will appear.
4. Press the POINT LEFT/RIGHT
to select SYSTEM and press the SELECT (REAR CLICK) BUTTON.
Another dialog box COLOUR SYSTEM DISPLAY will appear. The current COLOUR SYSTEM is displayed in the
system window.
5. Press the POINT DOWN BUTTON and a red arrow will appear.
6. To change the current COLOUR SYSTEM, press the POINT UP/DOWN BUTTON(s) to move the arrow to a
desirable system and then press the SELECT (REAR CLICK) BUTTON.
7. The setting changed remains effective until the MAIN ON/OFF switch is turned off.
MAIN
MENU DISPLAY
COLOUR SYSTEM
DISPLAY
SIMPLE METHOD
1. Press the SYSTEM BUTTON. COLOUR SYSTEM DISPLAY dialog box will appear.
2. Press the POINT DOWN BUTTON and a red arrow will appear.
3. To change the current COLOUR SYSTEM, press the POINT UP/DOWN BUTTON(s) to move the arrow to a
desirable system and then press the SELECT (REAR CLICK) BUTTON.
