Sanyo PDP-32H1ES, Service Manual

Page: 18 / 44

66 Color Temp L-PC Red FFh 00h FFh
PC Color Temperature (Low)
67 Green EBh 00h FFh
68 Blue CDh 00h FFh
69 Cont FEB Red FFh 00h FFh White Balance Adjustment
70 Green F4h 00h FFh
71 Blue D2h 00h FFh
72 Bright FEB Red 80h 00h FFh Black Balance Adjustment
73 Green 80h 00h FFh
74 Blue 80h 00h FFh
75 Cont PC Red 00h 00h FFh W/B
(Differential Data to FEB)
76 Green 00h 00h FFh
77 Blue 00h 00h FFh
78 Bright PC Red 00h 00h FFh B/B
(Differential Data to FEB)
79 Green 00h 00h FFh
80 Blue 00h 00h FFh
93 Sharpness-PC Sharpness 0 0 10 Filter
94 Sharpness-FEB1-50 Sharpness 10 0 10 Filter
95 Sharpness-FEB1-60 Sharpness 6 0 10 Filter
111 PDP COLOR8 PDP
Internal Pattern Display ( ∆ Key)
112 PDP WHITE PDP
Internal Pattern Display (
∆
Key)
113 Side Bar 81 0 225
Brightness od Side Bar
-18-
Adjustment
No. Note Adjustment Name
Data Area
Adjustment Item
Initial
Data
Min Max
■
Setting the fixed data
(1) Receive the good quality signal.
(2) Enter the Service Mode
(3) Confirm fixed data to be same as data table. If it is different, change to
correct data.
(4) Return to the Normal Mode
This adjustment is controlled by the CPU (IC801) thorough the IIC Data Bus Line in the chassis, and those
adjustment data are memorized into the memory IC (IC808). Therefore, Audio Board or the memory IC
(IC808) is replaced, data of those will be disappeared. Readjustment should be made. Initial data is
provided in the CPU ROM ,when memory IC (IC808) is replaced with new one, CPU ROM data is loaded
into the memory. (Data list will be shown in previous 2 pages.) Initial data is provided to operating the
monitor basically. For operating the monitor quality performance, further adjustment required following
chassis electrical adjustment.
■
Circuit Adjustment
●
Input Signal : 1.0Vp-p / 75 Ω terminated
■
White Balance Adjustment
Pattern : White Pattern
Condition : Screen Size : FULL, Picture Image Level : NATURAL
Adjustment : Enter the service mode, select item No. 69 [ Red ], 70 [ Green ] or 71 [ Blue ] (Cont AV), and
adjust a proper white balance.
Note : After adjustment, confirm white balance again by normal picture.