6
Getting Star
ted
Concerning Control Buttons for Configuration and Adjustment
Camera can be controlled remotely during setting or adjustment.
• Please refer to the instruction manual for VAC-70.
Button operations with VAC-70 are the same as with the unit.
• When configuration and adjustment are finished, always disconnect
the Camera Control Unit.
Regarding connection of the monitor, see the separate installation
manual.
• When configuration and adjustment are finished, always disconnect
the monitor and install the dome cover.
Using the Camera Control Unit (VAC-70: Separately ordered)
Using the Control Buttons on the Circuit Board
■
To display the main menu
VAC-70:
Press the MENU button
1
.
Main unit: Hold down the SET button
3
for over a second.
■
To operate the menu screen
• Select the item and change the setting value by pressing the Select
button
2
.
• Enter the advanced settings screen by pressing the SET button
3
.
■
To conduct pan/tilt and zoom
• The pan/tilt and zoom functions can be operated using the Select
button
2
during live mode (with no settings screen displayed).
• Press the SET button
3
to switch over between pan/tilt and zoom
operations.
<Pan/Tilt operations>
Pan:
Press
d
(LEFT) or
c
(RIGHT)
Tilt:
Press
j
(UP) or
l
(DOWN)
<Zoom operations>
Wide:
Press
d
(LEFT)
Tele:
Press
c
(RIGHT)
UP
DOWN
LEFT
RIGHT
SET
GND
MONITOR
OUT
1
3
2
(VAC-70)
(Main unit)
L5BP2_BQ2_US(GB).book 6 ページ ２００６年９月４日 月曜日 午後４時２４分
