25
Setting Camera Performance <CAMERA>
The DAY/NIGHT function automatically switches over between COLOR and B/W mode
depending on the ambient brightness. As appropriate for any specific environment, you
can fix the mode to either COLOR or B/W, and adjust the way the switching function works.
1
Select <DAY/NIGHT> and specify a mode.
R
Image switches immediately after the selection is made.
2
For advanced settings (“AUTO” or “B/W”), press
the SET button.
R
Each corresponding settings screen will appear.
• Advances to
A
on next page when selecting “AUTO”.
Advances to
B
on page 27 when selecting “B/W”.
■
If you want to return to the previous screen
Select <MENU> – “BACK” and press the SET button.
■
If you want to close the settings screen
Set <MENU> to “END” and press the SET button.
Adjusting DAY/NIGHT Function <DAY/NIGHT> :
(VDC-DP9584N/VDC-DPN9585P)
Note:
During the switching operation, you may hear switch-over noise
inside the camera or see a distorted picture, but these are not signs
of trouble.
SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
·DAY/NIGHT
PRESET
MENU
INT
OFF
SET y
ATW
NORM
0.45
60
HIGH
AUTO y
OFF
BACK
·DAY/NIGHT
■
AUTO: (see next page)
Automatically switches between COLOR and B/W mode
depending on the ambient brightness (DAY/NIGHT function).
■
COLOR
Color image on a steady basis; suitable for always bright
location or conditions.
■
B/W (Black-and-White): (see page 27)
B/W image on a steady basis; suitable when sensitivity is
prioritized.
For accessing the main menu, see pages 7 – 8.
L5BP2_BQ2_US(GB).book 25 ページ ２００６年９月４日 月曜日 午後４時２４分
