- 71 -
33
OPTIONAL COMPONENTS
6.
An attached binder (two pcs) is used for the fan cover
of the top of the chamber as the Fig. 5, and a temperature
sensor is fixed.
7.
Route the capillary on the top of the chamber and fix it
with the provided clip and screw. (Fig. 6)
8.
Make a cut on the rubber caps so that the capillary
can pass the caps and place them back on the access
port (inside and outside). (Fig. 7)
Attachment of recorder MTR-G04
1.
Unscrew the screw fixing the panel cover at the space
for temperature recorder and open the panel cover. (Fig. 1)
2.
Fix the temperature recorder to the frame in the
temperature recorder mounting kit (MPR-S7) referring to
the instruction manual enclosed with the temperature
recorder mounting kit. (Fig. 2)
Clip
Capillary
Fig. 6
Binder
Fig. 5
Temperature
recorder
Capillary
Rubber cap
Fig. 7
Fig.
Shaft
Panel cover
Recorder
fitting
Fig. 2
