Sanyo MM-8300 - Cell Phone 2 MB, Phone Manual

Page: 231 / 332

Section 2K: Using Sprint PCS Ready Link 215
Receiving a Sprint PCS Ready Link Call
To receive a Sprint PCS Ready Link call:
1.
Make sure your phone’s Sprint PCS Ready Link mode
is enabled (see “Setting Sprint PCS Ready Link Mode”
on page 206).
2.
When you receive a Sprint PCS Ready Link call from a
contact, “R-Link Call,” the contact’s name, and the
Sprint PCS Ready Link number appear on the display.
(You do not need to take any action to answer the
call.)
When you receive a group call, “Group Call,” the
group member’s name, and the Sprint PCS Ready
Link number appear.
3.
If the person placing the call has kept the floor (held
the Ready Link/Memo button), you will see the
contact name and Sprint PCS Ready Link number
along with “has floor,” and you will hear the caller
speaking.
4.
When the caller finishes speaking and releases ,
you will see “Floor is open.” on the display screen.
Press and hold
to take the floor and reply to the
caller. (You will see “You have floor.” and hear a tone
confirming that you may speak.)
5.
When the conversation is finished, press .
Tip:
You can also receive a Sprint PCS Ready Link call with the flip closed.
Press and hold the Ready Link button to take the floor when the floor is open.
Sprint PCS Ready Link