Sanyo MDF-U333, Service Manual

Page: 32 / 53

− 29 −
１０． １０． １０． １０．
Function mode
Functions are as follow.
F00
：
To return to PV display
F01
：
To change temperature of high temperature alarm
F02
：
To change temperature of low temperature alarm
F03
：
To change temperature of high temperature alarm
(Applied for lower compartment of MDF-U537D)
F04
：
To change temperature of low temperature alarm
(Applied for lower compartment of MDF-U537D)
F05
：
To set compressor delay start time
F06
：
To input service code (384)
F07
：
To adjust zero for temperature sensor
(Upper compartment sensor for MDF-U537D)
F08
：
To adjust zero for temperature sensor
(Not available for MDF-U333)
(Solenoid valve control sensor for MDF-U537)
(Lower compartment sensor for MDF-U537D)
F09
：
Not available
F10
：
Not available
F11
：
Not functioned. Return to PV display.
F12
：
To display temperature of temperature sensor (per 0.1
℃
)
F13
：
To display temperature of MDF-U537/U537D compressor protect sensor (per 1
℃
)
F14
：
To display temperature of temperature sensor (per 0.1
℃
)
(Solenoid valve control sensor for MDF-U537)
(Lower compartment sensor for MDF-U537D)
F15
：
Not available
F16
：
Not functioned. Return to PV display.
F17
：
To set or check model code
model code 001
：
MDF-U333
model code 002
：
MDF-U537
model code 003
：
MDF-U537D
F18
：
Preset value for second offset performance: -26
℃
(for MDF-U537/U537D)
F19
：
Not functioned. Return to PV display.
F20
：
Not functioned. Return to PV display.
F21
：
To set communication ID
（
000
～
255
）
F22
：
To set communication mode
F23,24,26
～
29
：
With input each function code, press SET key to sound buzzer 1 second
continuously to maintain input status.
F25
：
To set alarm ring back time
Setting value: 000,010,020,030,040,050,060
Setting method
：
： ：
：
In PV display, keep key pressing over 5 seconds to enter function mode and will be
displayed “F00”. Press key to input required function code then press
SET key again.
F00
：
Not functioned. In F00 displayed, press SET key to return PV display.