2
POWER SUPPLY
AC power operation
Connect one end of the mains lead to the (AC ~
IN) socket and the other end to an AC outlet.
The unit is not disconnected from the mains
unless the mains lead is unplugged from the AC
outlet.
The AC mains plug shall remain readily
operable.
Battery power operation
1.
Open the battery compartment lid by
pushing down on the tabs.
1.
Install 8 x “C” size batteries (not supplied).
Refer to the polarity diagram in the battery
compartment of the unit. Match the marks
of (+) and (-) on the diagram to the marks
of (+) and (-) on the batteries.
8 x “C” size batteries
2.
Replace the lid.
BATTERY PRECAUTIONS
Follow these precautions when using
batteries in this device:
1. Use only the size and type of batteries
specified.
2. Be sure to follow the correct polarity
when installing the batteries as indicated
in the battery compartment. Reversed
batteries may cause damage to the
device.
3. Do not mix different types of batteries
together (e.g. Alkaline and Carbon-Zinc)
or old batteries with fresh ones.
4. If the device is not to be used for a long
period of time, remove the batteries to
prevent damage or injury from possible
battery leakage.
5. Do not try to recharge batteries, which
are not intended to be recharged; they
can overheat and rupture. (Follow
battery manufacturer’s directions )
