4) Press key “
Read
”
，
select burning file (for example
MERGE.bin
) as
Fig. 4.
Fig. 4
Burning file
5)
Select menu “
Auto
”, then select items “
All chip
”, “
program
” and other configuration as
Fig. 5
Fig. 5
Burning Configuration
6) Press key “
Run
” as
Fig. 4
to begin burning software, there are two steps for the process:
Erase
and
Program
normal burning steps are as follows:
the first step “
Erasing…
，
Flash Status: 03
” will be lasting for a moment, otherwise skipping over
means unsuccessful erasing; please confirm process
（
2
）
and then burn software again;
the following step “
Programming…
，
Flash Status:00
” will be done until a prompt “
Pass
” is
displayed.