background image

Important Safety Precautions 

(Continued)

15. Stand

---Use only with the cart, stand, tripod, bracket, or table specified by 

the manufacturer, or sold with the apparatus. Do not place the product on an 
unstable trolley, stand, tripod or table. Placing the product on an unstable base 
can  cause the product  to fall,  resulting in serious personal  injuries as  well as 
damage to the product. When mounting the product on a wall, be sure to follow 
the  manufacturer’s  instructions.  Use  only  the  mounting  hardware 
recommended by the manufacturer.

16.Careful  move

---When  a  cart  is  used,  use  caution  when  moving  the 

cart/apparatus  combination  to  avoid  injury  from  tip-over.  Sudden  stops, 
excessive force and uneven floor surfaces can cause the product to fall from the 
trolley.

Never  attempt  to  move  the  TV  unless  the  AC    power  cord  has  been 
disconnected.

17.

 

Lightning

---Unplug this apparatus during lightning storms or when unused 

for long periods of time.

For added protection for this television equipment during a lightning storm, or 
when it is left unattended and unused for long periods of time, unplug it from the 
wall  outlet  and  disconnect  the  antenna.  This  will  prevent  damage  to  the 
equipment due to lightning and power-line surges.

18. Do not use this apparatus near water

---for example, near a bathtub, 

washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming 
pool, and the like. 

Do  not  use  immediately  after  moving  from  a  low  temperature  to  high 
temperature environment, as this causes condensation, which may result in fire, 
electric shock, or other hazards.

19.  Clean  only  with  dry  cloth

---Unplug  this  product  from  the  wall  outlet 

before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth 
for cleaning.

20. Ventilation

---Do not block any ventilation openings. Install in accordance 

with the manufacturer instructions. The vents and other openings in the cabinet 
are designed for ventilation. Do not cover or block these vents and openings 
since insufficient ventilation can cause overheating and/or shorten the life of the 
product. Do not place the product on a bed, sofa, rug or other similar surface, 
since they can block ventilation openings. This product is not designed for built-
in installation; do not place the product in an enclosed place such as a bookcase 
or rack, unless proper ventilation is provided or the manufacturer’s instructions 
are followed.

21.Heat sources

---Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that produce heat.

22.Panel protection

---The display panel used in this product is made of glass. 

Therefore, it can break when the product is dropped or impacted upon by other 
objects. Be careful not to be injured by broken glass pieces in case the display 
panel breaks.

23.Pixel defect

---The display panel is a very high technology product, giving you 

finely detailed pictures. Occasionally, a few non-active pixels may appear on the 
screen as a fixed point of blue, green or red. Please note that this does not affect 
the performance of your product.

WARNING:

 For continued safety, apparatus with class I construction shall be 

connected to a mains socket outlet with a protective earthing connection.

The apparatus shall not be exposed to dripping or splashing 

and  that  no  objects  filled  with  liquids,  such  as  vases,  shall  be  placed  on  the 
apparatus.

5

Summary of Contents for LCD-32XR12F




































Reviews: