Sanyo LCD-32XR10F, Service Manual

Page: 22 / 46

 Digital Audio Interface

·  I2S digital audio input & output
·  S/PDIF digital audio input & output
·  HDMI audio channel processing capability
·  Programmable delay for audio/video synchronization
 Analog RGB Compliant In

put Ports
·  Three analog ports support up to 1080P
·  Supports PC RGB input up to SXGA@75Hz
·  Supports HDTV RGB/YPbPr/YCbCr
·  Supports Composite Sync and SOG (Sync-on-Green) separator
·  Automatic color calibration
 DVI/HDCP/HDMI Compliant Input Port

·  Three DVI/HDCP/HDMI input ports support up to 225MHz @ 1080P 60Hz with 12-bit
deep-color resolution
·
 Single link on-chip DVI 1.0 compliant receiver
·  High-bandwidth Digital Content Protection (HDCP) 1.1 compliant receiver
·  High Definition Multimedia Interface (HDMI) 1.3 compliant receiver with CEC (Consumer
Electronics Control) support
·
 Long-cable tolerant robust receiving
 MACE

-4, MStar Advanced Color Engine year 2009 Edition, provides superb visual
quality for wider gamut FHD panels
·  Fully programmable shrink/zoom capabilities
·  Panorama and various scaling supports
·  3D motion adaptive video de-interlacers with de-flickering and edge smoothing functions
·  Automatic 3:2 pull-down & 2:2 pull-down detection and recovery
·  Supports sRGB and xvYCC color processing
·  Supports HDMI 1.3 deep color format
·  Supports linear/nonlinear color mapping for wider gamut panels
·  10-bit internal data processing
·  Programmable 12-bit RGB gamma CLUT
·  3D video noise reduction
·  MPEG artifact removal including de-blocking and mosquito noise reduction
·  Frame rate conversion
 Output Interface

·  Supports up to 10-bit dual LVDS full-HD (1920 x 1080) panel interface
·  Supports 2 data output formats: Thine & TI data mappings
·  Spread spectrum output frequency for EMI suppression
 CVBS Video Output 
 2D Graphics Engine

·  256-pin LQFP package
·  Operating at 1.26V (core), 1.8V (DDR2), and 3.3V (I/O and analog)