Sanyo LCD-19XR9DA, Service Manual

Page: 48 / 51

Assembling the stand and removing the stand column(Option)
Push downwards
Stand
Stand groove
Stand column
S
afety Precautions:
1.Please read these instructions thoroughly prior to attempting this installation.
2.Be sure to handle this product very carefully when attempting assembly. If you are unsure of your
capability, or the use of tools necessary to complete this activity, refer to a professional installer or
service personnel. The manufacturer is not responsible for any damages or injuries that occur due to
mishandling or improper assembly/installation.
3.When using a table or bench as an aid to assembly, be sure to put a soft cushion or covering to prevent
accidental scratching or damage to the unit's finish.
4.The speaker is not intended to support the weight of this display. Do not move or handle this product
from the speaker; which can cause damage to the display not covered under the manufacturer's
warranty.
Place the stand on the table, hold the display upright and aim the bottom stand column toward the
stand groove, then carefully push the display downwards, fully insert the column into the stand until
the lock snaps. Now the stand is assembled.
Installing the Stand
Adjusting the viewing angle of the TV
Adjust the angle forward up to 5
°
and backward up to 10
°
.
Note: When adjusting the angle, use caution to avoid slipping or tipping the TV.
5°
Stand
forward
10°
Stand
backward
If the stand is provided, please read these instructions thoroughly before attempting this installation.