Sanyo LCD-19XR9DA(C), Service Manual

Page: 27 / 51

(MP@HL profile) video decoder, a MPEG-4 decoder, a H.264 video decoder, and an audio DSP decoder
for MPEG audio streams, MPEG layer I and II digital audio decoder with analog audio outputs that are
designed to support existing and future DVB-T programs while handling conditional access.
Furthermore,it is also possible to decode JPEG, RealVideo streams, and MP3 formats from external
sources such as USB interface.For analog TV, the MSD209GL includes NTSC/PAL/SECAM
multi-standard video decoder comprising a 3D motion adaptive comb filter and time-based correction, and
a NICAM/A2 audio decoder to support worldwide television standards. The MSD209GL is also configured
with a VBI processor to decode digital information such as Close
Caption/V-chip/teletext/WSS/CGMS-A/VPS. In addition, the MStar advanced LCD TV processor
enhances video quality, motion adaptive de-interlacer, picture quality adjustment units, and MStarACE-3
color engine.With USB 2.0 host controllers, UART, IR, SPI, I2C, and PWM, the MSD209GL fulfills all
requirements in advanced DTV sets. To reduce system costs, the MSD209GL also integrates intelligent
power management control capability for green-mode requirements and spread-spectrum support for EMI
management.
MSD209GL Features
：
Twin-turbo 8051 Micro-controller
Twin-turbo 8051 MCU
Interrupt controller
Supports ISP
Two full duplex UARTs
DMA engine to speed up large data movement
Transport Stream De-multiplexer
One external TS input and one internal TS data path
Supports serial TS interface, with or without sync signal
Maximum TS data rate is 104 Mb/sec
32 general purpose PID filters and section filters for each transport stream de-multiplexer
One video PES and one audio PES channel
Supports DVB subtitle and digital teletext
Supports additional audio/video/PCR filters
Supports TS DMA channel for time-shift
Supports AES encryption/decryption
MPEG-2 A/V Decoder
ISO/IEC 13818-2 MPEG-2 video MP@HL
Automatic frame rate conversion
Supports resolution in HDTV (1080i, 720p) and SDTV
Supports MPEG-1, MPEG-2 (Layer I/II), Dolby 1 Digital (AC-3), and AAC audio decoding
Optionally Supports Dolby Digital Plus (
E-AC-3
) decoding, and Dolby Digital Compatible Output
(DDCO) for HE-AAC to DD transcoding
MPEG-4 Video Decoder
ISO/IEC 14496-2 MPEG-4 ASP video decoding
Supports resolution in HDTV (1080p@30fps)
Supports DivX 3 Home Theater or HD profile Optional
¡
H.264 Decoder
ITU-T H.264, ISO/IEC 14496-10 (main and high profile up to level 4.0) video decoding