Unit Display and Operation Selector
REMOTE CONTROL
receiver
This section picks up infrared signals from the remote control unit
(transmitter).
Operation selector
ON position
This position is for operating the air conditioner with the wireless
remote control unit.
Set the selector normally in this position.
OFF position
Switch the selector to the OFF position if you are not going to use
the air conditioner for a few days or longer.
The OFF position does not disconnect the power. Use the main
power switch to turn off power completely.
TEST position
This position is used only when servicing the air conditioner.
CAUTION
Do not set the operation selector at the TEST position for normal
operation.
OPERATION lamp
This lamp lights when the system is in the continuous DRY and
COOL mode.
TIMER lamp
This lamp lights when the system is being controlled by the timer.
OPERATION
TIMER
ON
OFF
TEST
INDOOR UNIT
IMPORTANT
Avoid using radio equipment
such as mobile phone near
(within 4 ft. of) the indoor unit.
Some radio equipment may
cause the unit to malfunction.
If the trouble occurs, dis-
connect power and restart the
air conditioner after a few
minutes.
OPERATION lamp
Operation selector
Remote control
receiver
TIMER lamp
6
OI-
508
-06EG
ois
508
000
