Sanyo HV-DX350A, Instruction Manual

Page: 23 / 66

20 21
Setting time and date
20 21
Output Select
Basic
O
peration
OSD ON & OFF
Press [DVD] button.
If DVD mode is correctly selected, DVD on the operation display window is lit.
Then, REMOTE button works as DVD function. Press the [DVD] button, then
the mode of DVD-Video Player becomes to the OPERATION mode.
Press [VCR] button.
If VCR mode is correctly selected, DVD on the operation display window
goes out. Then, REMOTE button works as VCR function. Press the [VCR]
button, then it becomes to the VCR OPERATION mode.
Press [INPUT] button.
When you press [INPUT] button, BROADCASTING RECEPTION and EXTERNAL INPUT is selected. But, it
is not operated in PLAY, REC and DVD mode.
Call the player’s "SETUP".
1
Choose “VCR SETUP”.
And press the [OK] button.
2
Select “OSD ON/OFF”.
If you want OSD OFF mode, select it and press [OK] button to
confirm.
Then OSD characters are not displayed in the normal picture.
3
This player is set to “OSD (On Screen Display) ON” mode before shipping and you can change it to
OFF mode.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END
SETUP
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM SETUP:END
OSD (On Screen Display) ON & OFF
To Select DVD
To Select VCR
To Select Watch Modes or External Input
■
Press [VCR] button on the remote control to change into VCR Mode and follow the procedure
below.
Call the player’s "SETUP",
choose "VCR SETUP", then "CLOCK SET".
1
Move to the position you want to change and type in the
new values.
Wait a few seconds after typing a one-digit number.
2
Store with [OK] button and exit with [SETUP] button.
CLOCK SET
0-9:SETUP (HOUR)
/
➝
:CORRECT SETUP:END
TIME - - : - -
DATE - - / - - /- - - -
CLOCK SET
0-9:SETUP (HOUR)
/
➝
:CORRECT
OK:CONFIRM SETUP:END
TIME 06:05
DATE 06/08/2006(SUN)
Setting time and date
➝
➝