18
１
６
４
５
３
２
MASSAGING (AUTOMATIC COURSES)
①
Measure the position of shoulder.
②
Starts the massaging of selected course.
5
Massaging will start automatically.
6
Adjust the strength of massage.
(See page 19)
4
Press the desired Automatic Course button.
Massages mainly
the neck and
shoulders.
NECK & SHOULDER
LOWER BACK
Massages mainly
the waist and lower
back.
LOWER BODY
Air massage mainly
on the legs and
soles of the feet.
COMFORT AIR COURSE
Air massage mainly
on the waist and
legs.
1
Press the OPERATION ON/OFF button.
3
Adjust the positions of the back rest and the foot rest.
(See page 12 - 14)
2
Turn the sole warmer on or off.
The massaging that corresponds to the
pressed button will stop. (The Massaging
rollers will stop at that point.)
All the massaging will stop.
(The massaging rollers are moved to the
upper position and remain in that position.)
All the massaging will stop and the lamp of the remote
control will turn off.
When you want to restart massaging, press the
OPERATION ON/OFF button. (The massaging rollers
move to the upper position and remain in that
position.)
After the movement, repeat the operation to begin a
massage.
If you have felt abnormal physical sensation or want to stop the massager immediately
To stop the massage during operation.
Press the OPERATION ON/OFF button.
Press the INSTANT STOP button.
Press the button for the current operation.
The massaging rollers are moved to the upper position and are stopped automatically approx. 15 minutes
after starting the operation. The beep sounds and the lamp on the remote control will turn off.
Check if the position of shoulder is correct. If not, adjust the position using the POSITION ADJUST buttons.
(The POSITION ADJUST buttons can also be used while massaging is in progress.) (See page 19)
LOWER BODY can be operated simultaneously with NECK & SHOULDER or LOWER BACK.
COMFORT AIR COURSE cannot be operated simultaneously with any other courses.
Refer to the page 28 regarding the massaging contents of Automatic Courses.
Change of course during massaging, or change to the Whole Body Sensor Automatic Courses or the
Manual Courses, is possible.
■
Finishes massaging automatically by timer operation.
Sole warmer will be turned on or off each time
the SOLE WARMER button is pressed. (The button is
illuminated while the sole warmer is on.)
If you feel that the sole warmer is too hot, turn it off
by pressing the SOLE WARMER button.
＊
When the room temperature is low such as in winter, it
takes some time to warm up or you may barely feel warm.
When the button is pressed, the lamps of the sole warmer
and remote control will illuminate, and the sole warmer
will turn on.
When the foot rest is fully lowered, the foot rest will rise a little.
When the massaging rollers are not located in the upper
section, the massaging rollers will move to the upper
section and stop. (During the movement, the icon of
“ORIGIN” on the remote control flickers.)
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
