background image

- 9 -

HEC-DR5000

 (GENERAL)

Massage Motors

Shoulder Gripping & Massaging

         With the aid of a massage hand unit with a joint which moves freely like a thumb, a 
           massaging technique called "Grip/Grasp/Massage/Knead" for gripping and massaging 
           the muscles of shoulders has been reproduced.
         This massaging technique has been reproduced by way of gripping the shoulders from 
           above while projecting the massage hands greatly together with a massage unit at the 

           back (maximum projection of massage hands: approx. 160mm).

Operation of Shoulder Gripping & Massaging

        There are two large massage hands and two small massage hands at both ends of the 
          right and left massage arms. The small massage hands have the structure to move freely.
        The massage hands move from side to side according to the operation of massage motors. 
          When the distance between the massage hands becomes narrower (the massage hands 
           move inwards), the massage hands move so that the clearance between the large 
           massage hands and the small massage hands becomes narrower.
        Operation of shoulder gripping and massaging: Shoulder position is first measured, and 
          the massage hands project forward greatly only at the shoulder position and "grip and 
          massage the shoulders".

        *The "shoulder gripping and massaging" function does not work on the back or the waist.

Wide massage hands

Narrow massage hands

Large massage hands

Small massage hands

Summary of Contents for HEC-DR5000
































Reviews: