GENERAL OPERATION
2
1
3
7
4
6 10 8
9
5
TURNING THE POWER ON........................Any button
Install the front panel and press any button (except
REL
and button) when ACC is on.
TURNING THE POWER OFF ...............................….. 1
When system is on, press the
POWER
button 1 to turn off the unit.
VOLUME LEVEL CONTROL.......................................2
Rotate the
VOL
dial 2 to adjust the volume level.
ADJUSTING THE SOUND
CHARACTERISTICS ..................................….........2, 3
Press the AUDIO/SET button 3 shortly:
1. Each time you press the
AUDIO/SET
button 3 shortly, the item changes as follows;
VOL BAS TRB BAL FAD
(Volume) (Bass) (Treble) (Balance) (Fader)
2. Rotate the
VOL
dial 2 to adjust the selected item. Make the adjustment within 5 seconds after
selecting. After 5 seconds, the display window will revert to display priority.
Adjustment Range
BASS (BAS 00)
BAS –10
BAS 10
TREBLE (TRB 00)
TRB –10 TRB 10
BALANCE (BAL L=R)
10L
10R
FADER (FAD F=R)
10F
10R
Press and hold the AUDIO/SET button 3 for several seconds:
Press and hold the
AUDIO/SET
button 3 for several seconds to enter into the selection for the
situation of beep sound, then rotate the
VOL
dial 2 clockwise or counter-clockwise to select as
follows:
BEEP 2ND BEEP ALL BEEP OFF
-
BEEP 2ND mode:
The beep is only generated when all allowed double function button is pressed long (several
seconds).
6
