GB–12
AUTOMATIC RE-TUNING ...................................1,3,5
The Alternative Frequencies (AF) function automatically selects and tune to the station with the strongest
signal in a network. By using this function, you can continuously listen to the same programme during a
long-distance drive without having to re-tune the station manually.
1.
Press the BAND ATP button 3 to select the FM band.
2.
Hold the TA AF button 1 for more than 2 seconds to display the “AF” indicator in the display window.
3.
Press the TUN/TRK
or
buttons 5 to tune in to a desired RDS station includes the AF data, the units
starts searching for an alternative station with a stronger signal in the same network.
SELECTING REG ON OR REG OFF ................................................. 2
Hold the PTY button 2 for more than 2 seconds to select REG OFF. The “REG” indicator will go out in the
display window.
Hold the PTY button 2 again for more than 2 seconds to select REG ON. (There may be cases where this
function may not be activated in some areas, especially in the United Kingdom)
REG ON
: The tuner remains tuned to the current regional programmes.
REG OFF
: The tuner may tune to another regional programme in the network.
RECEIVING TRAFFIC ANNOUNCEMENTS ...............1,3
The Traffic Announcement (TA) and Traffic Programme (TP) data allows the radio to automatically tune in
to an FM station which broadcasts traffic announcements while you are listening to other programme
sources.
1.
Press the BAND ATP button 3 to select the FM band.
2.
Press the TA AF button 1 to display the “TA” indicator in the display window. Press the TA AF button
again to cancel.
You can listen to traffic announcements by using the Automatic or Manual tuning. “TP” appears in the
display window when the unit receives an RDS station broadcasting traffic announcements.
During reception of a traffic announcement, the “TA” indicator flashes in the display window. Then press
the TA AF button 1 to cancel Traffic announcement (but still in TA mode). To cancel the TA mode, press
the TA AF button 1 again during NO-reception of a traffic announcement.
PRESETTING THE VOLUME OF TRAFFIC ANNOUNCEMENTS .... 6
You can preset the volume level of the traffic announcements.
When a traffic announcement starts, the volume will be automatically adjusted to the preset level.
Rotate the VOL dial 6 to adjust to the desired volume level during reception of the traffic announcements.
780RDS/CDC_body
8/20/02, 5:58 PM
12
