Sanyo FWSB426F, Owner'S Manual

Page: 13 / 24

– 13 –
EN
Experiencing the Surround Sound
1
Press on the Remote Control to activate the Surround sound.
• The LEDs blink in a spread manner, from the center (OPTICAL/COAXIAL) to both sides.
Surround status LED lighting patterns Sound effects
ON
AUX PAIR LINE USB OPTICAL/
COAXIAL USB OPTICAL/
COAXIAL AUX

AUX PAIR LINE USB OPTICAL/
COAXIAL LINE USB O
C AUX PAIR L/
L
OPTICAL
COAXIAL

AUX PAIR LINE USB OPTICAL/
COAXIAL LINE USB O
C AUX PAIR
Outputs high realistic sounds.
2
If you want to set Surround sound to Off, press on the Remote Control once again.
• The 3 LEDs in the middle (USB, OPTICAL/COAXIAL, AUX) blink twice.
Surround status LED lighting patterns Sound effects
OFF
AUX PAIR LINE USB OPTICAL/
COAXIAL LINE PAIR USB O
C AUX L/
L
OPTICAL
COAXIAL
Outputs the original sound.
NOTE(S)
• The Default setting is Off.
• This Setting will remain while the Soundbar is in Standby mode.