– 11 –
EN
USING YOUR SOUNDBAR
Turning On the Soundbar
1
Press
on the Remote Control.
2
Check that the LED indicator on the rear of the Subwoofer steadily lights up.
• The LED lights up if the Subwoofer is properly connected to the Soundbar.
Rear of Subwoofer
R
Rear of Subwoofer
LED
CONNECT button
If the Soundbar is not Connecting to the Subwoofer:
1. Make sure the Subwoofer is connected to an AC outlet.
2. Press and Hold the CONNECT button on the Rear of the Subwoofer until the Red LED starts blinking rapidly.
3. Using the Remote Control, switch the Soundbar Input to AUX by pressing the AUX button.
4. Press and Hold the
PAIR
button on the Remote Control until the AUX and BLUETOOTH LEDs on the Soundbar
blink together.
• The Soundbar is now attempting to Pair with the Subwoofer. The Red LED on the Rear of the Subwoofer will steadily
light up after the pairing success.
3
Select Input source.
LINE
USB
INPUT
AUX
PAIR
OPTICAL/
COAXIAL
e.g.) When
was pressed the OPTICAL INPUT
(Orange LED) was selected. If the
was
pressed again the COAXIAL INPUT (Green LED)
was selected.
• One of the INPUT indicators will light up when you switch to your Connected Source.
• For Bluetooth connections, refer to “Playing back a music file through Bluetooth” on page 15.
