Wireless network setting
This menu is displayed only when you set
Wireless
in
Network
selection
. In order to use a wireless network, you must set up a
connection to the AP (e.g. wireless router).
2
Use
H
I
to select
Wireless network setting
, then press
OK
.
Auto
Search for wireless networks automatically and select the SSID from the
list.
3
Use
H
I
to select
Auto
, then press
OK
.
4
The list of wireless networks will be displayed. Use
H
I
to select
the appropriate the SSID, then press
OK
.
Manually enter your SSID
Auto
Router 4
Router 3
Router 2
Router 1
Manual
Simple Connect
Pin code
●
If you select the SSID with , WEP
*2
/ others Key entry screen
will appear. Enter the WEP
*2
/ others key of the selected wireless
network using
H
I
J
K
, then press
OK
.
●
If you select the SSID has an easy connect, the easy connect
setting screen will appear. Use
H
I
J
K
to select a setting, then
press
OK
.
Simple Connect
Select this setting if your router has an easy
connect button. Start scanning for wireless
networks on the TV after pressing the easy
connect button on your router. If connection test
fails, try
Simple Connect
again.
*1
If it fails then
refer to the router’s manual for more details.
Pin code
Select this setting if your router has an easy
connect feature but does not have an easy
connect button. Enter the 8-digit PIN code shown
on your TV in the Router settings menu via PC
before
Connect
is selected.
Manual
If your wireless network with authentication
setting (WEP
*2
, others), WEP
*2
/ others Key entry
screen will appear. Enter the WEP
*2
/ others key
of the selected wireless network using
H
I
J
K
,
then press
OK
.
*1
Simple Connect cannot be used when the security protocol is set
to WEP. Change the Access Point’s security mode from WEP to
others (recommended).
*2
WEP is not recommended to be used due to its major security
flaws. Change the security protocol on the wireless router to others
(recommended) mode.
Confirmation message will appear. Select
OK
to complete the settings.
Note(s)
●
For a wireless network with authentication setting, key icon appears to the right hand of the
SSID.
●
Signal icon shows the strength of the signal.
●
WEP
*2
/ others key appears as asterisks on the confirmation screen.
●
The wireless LAN supports following specifications.
–
Wireless standards: IEEE 802.11 b/g/n
–
Frequency spectrum: 2.4GHz
–
Security protocol: WEP
*2
/ others
Manually enter your SSID
Set up the connection to the AP (e.g. wireless router) manually by
entering the SSID.
3
Use
H
I
to select
Manually enter your SSID
, then press
OK
.
●
AP (e.g. wireless router) SSID entry screen will appear.
Enter the SSID using
H
I
J
K
, then press
OK
.
4
Use
H
I
to select the authentication setting of the selected wireless
network.
●
For a wireless network with authentication setting, select the
authentication setting, according to the security type of the
wireless network.
XXXXXXXXXXXXXX
WEP
None
Manually enter your SSID
Auto
Others
None
Set the authentication setting to
None
.
WEP
Set the authentication setting to
WEP
*
.
Others
Set the authentication setting to
Others
.
●
For a wireless network without authentication setting, select
None
.
●
If you select
WEP
*
or
Others
, WEP
*
/ others Key entry screen will
appear. Enter the WEP
*
/ others key of the selected wireless network
using
H
I
J
K
, then press
OK
.
●
Confirmation message will appear. Select
Yes
to complete the
settings.
*
WEP is not recommended to be used due to its major security flaws.
Change the security protocol on the wireless router to others
(recommended) mode.
40
.
English
Continued on next page.
Summary of Contents for FW50C36F
Page 57: ...AZLU4UT ...