Sanyo FW43D47F, Owner'S Manual

Page: 10 / 39

Control panel
f
c d e
a
b
a
Remote control sensor
Receives IR signal from remote control.
b CH + / –
Selects a channel. In the menu screen, moves the cursor
up (+) / down (–).
c
B (POWER)
Turns the TV on or switches the TV into standby mode.
d
MENU
Opens the main on-screen menu.
e
SOURCE
Selects connected devices.
f VOL + / –
Adjusts the volume. In the menu screen, moves the cursor
left (+) / right (–).
VOL + :
Volume up
VOL –
: Volume down
Terminals
l
m
g
h
k
i
j
g 75 ohm cable / Antenna connection
Signal input from an antenna or cable / satellite set-top boxes.
h Analog audio (L/R) input jacks
Connect analog audio signals from;
–
HDMI-DVI / Analog audio (L/R) jacks signal
–
Component video / Analog audio (L/R) jacks signal
–
Composite video / Analog audio (L/R) jacks signal
–
PC connection / Analog audio (L/R) jacks signal with stereo mini
3.5mm plug audio cable on PC
i Digital audio output jack
Digital audio (S/PDIF) output to home theaters and other digital audio
systems.
j Component (Y/Pb/Pr) / Composite video (VIDEO) input jack(s) for
VIDEO
Composite video input (VIDEO) jack is a shared jack with component
video input (Y) jack. Green / Yellow color orientation depends on
model.
k HDMI input jack(s)
Digital audio and video input from high definition digital devices such
as DVD / Blu-ray disc players, cable / satellite set-top boxes, PC’s,
etc.
l Headphone audio output jack
Headphone 3.5mm stereo jack for personal listening.
m USB terminal
Data input from USB memory stick only.
Do not connect any device to this terminal such as digital camera,
keyboard, mouse, etc.
10 .
English
Continued on next page.