background image

DISC NOTES

A.  Notes on discs:

• Attempting to use non-standard 

shape discs (e.g.  square, start, heart)
may damage the unit.  Be sure to use
round shape CD discs only for this 
unit.

• Do not stick paper or tape etc., onto 

the label side or the recording side of 
any discs, as it may cause a 
malfunction.

• Dirt, dust, scratches and warping 

discs will cause misoperation.

B.  Notes on CD-Rs (recordable 

CDs)/CD-RWs (rewritable CDs):

• Be sure to use discs with following 

marks only for the unit to play:

• The unit cannot play a CD-R and

CD-RW that is not finalized.
(Please refer to the manual of your
CD-R/CD-RW recorder or CD-R/
CD-RW software for more 
information on finalization process).

• Depending on the recording status, 

conditions of the disc and the 
equipment used for the recording, 
some CD-Rs/CD-RWs may not be 
played on this unit.  (See *)

* To have more reliable play back, 

please see following 
recommendations:
a.Use CD-RWs with speed 1x to 4x 

and write with speed 1x to 2x.

b.Use CD-Rs with speed 1x to 8x and

write with speed 1x to 2x.

c.Do not play a CD-RW which has 

been written for more than 5 times.

11

OPERATION

If a CD is already inserted in the player:
Keep pressing 

MOD

 button 

(6)

 shortly

until the CD mode display appears.

SELECTING TRACKS

Press 

 MANU/SKIP  -

button 

(16)

 or  

MANU/SKIP+  

button

(17) 

to move 

to the previous track or the following 
track. Track number shows on display.
Hold

 MANU/SKIP  -

button 

(16)

 or 

MANU/SKIP+  

button 

(17) 

 to fast 

reverse or fast forward. CD play starts
when you release the button.

PAUSING PLAYING

Press 

PAU

 button 

(19)

 to pause CD 

player. Press it again to resume play.

PREVIEWING ALL TRACKS

Press 

SCN

 button 

(20)

 to play first 

several seconds of each track on the 
current disc. Press it again to stop 
intro and listen to track.

REPEATING THE SAME TRACK

Press 

RPT

 button

(21)

 to 

continuously repeat the same track. 
Press it again to stop repeat.

PLAYING ALL TRACKS IN 
RANDOM

Press 

SHF

 button 

(22)

to play all 

tracks on CD in random order. Press 
again to cancel the function.

EJECTING A DISC

When the front panel is in State 2 and
there is a disc in the disc slot, Press 
    button 

(4)

, the panel will turn down 

and eject the disc from the disc slot 

(5)

.

Note : When you first play a CD and when
whichever track is playing,press M5
button or M6 button,the unit will search
the disc again and start to play the first
track.Later,there is no function of pressing
M5 button or M6 button.

Recordable

Rewritable

Summary of Contents for ECD-T1550

















Reviews: