Sanyo ECD-T1550 Owner'S Manual Download Page 10

OPERATION

RADIO OPERATION

• SWITCHING TO RADIO MODE

Press MOD button (6) shortly to select
radio mode, the radio mode appears
in the display together with the memory
band and frequency.

• SELECTING THE FREQUENCY

BAND

At radio mode, press BND/LOUD
button (13) shortly to select the desired
band.
The reception band will change in the
following order:

• STATION SELECTION

Press 

MANU/SKIP 

+  button(17) or 

MANU/SKIP  -

button(16) shortly to

activate automatic seek function.  
Press for several seconds until 

“MANUAL”

 appears on the display,

the manual tuning mode is selected.
If both buttons are not pressed for 
several seconds, they will return to 
seek tuning mode and 

“AUTO”

 

appears on the display.

• LOCAL/DISTANT

Press

 LOC

 button (3) to select

between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations. This
function is in effect during AUTO
SEEK operation.

• AUTOMATIC MEMORY 

STORING & PROGRAM SCANNING

- Automatic Memory Storing

Press 

AMS

 button (18) for several 

seconds, the radio searches from 
the current frequency and checks 
the signal strength until one cycle 
search is finished.  The six 
strongest stations will be stored into 
the corresponding preset number 
button.

- Program Scanning

Press 

AMS

 button (18) shortly to 

scan preset station stored in memory.

•  STATION STORING

Press any one of the preset buttons 
(14) (M1 to M6) to select a station 
which had been stored in the memory.
Press this button for several seconds
(until 2’nd beeps come out) to store
current station in that preset button.

• MONO/STEREO

Press 

MON

 button (1) to select mono or

stereo mode. You can sometimes
improve reception of distant stations by
selection mono operation.

CD OPERATION

• SWITCHING TO CD MODE

If there is no CD inserted in the player :
When the front panel is in State 2 and
the unit is on, press 

EJECT

 button (4),

the panel will change into State 3 and
display the disc slot (5). Gently insert the
CD with the printed side on top into the
CD compartment until you feel some
resistance. The CD is drawn into the
player automatically and the panel will
automatically turn up. CD playback
begins.

10

FM1

FM2

FM3

AM

Summary of Contents for ECD-T1550

















Reviews: