Sanyo DWM-3900 Instruction Manual Download Page 38

Page: 38 / 46

Radio Operation

Presetting Radio Stations

You can preset 30 stations for FM and 30 stations for
AM. Before tuning, make sure that you have turned
down the sound level.

Press FM/AM on the remote control or on the
front panel until the frequency band appears on
the display and TV screen.

Use

on the remote control to find a desired

station.

Use FM/AM on the remote control or on the
front panel to select the desired band.

Hold down

on the front panel (or hold down

on the remote control) for 1 or 2 seconds.

The next station is automatically searched.

Press MEMORY/ENTER on the remote control.

Repeat steps 2 to 5 to store other stations.

Radio Operation

Preset radio stations in the unit memory first (see
“Presetting Radio Stations” on this page).

Press FM/AM on the remote control or on the
front panel until the frequency band appears on
the display and TV screen.

The last received station is tuned in.

Press

on the remote control repeatedly to

select the preset station you want.

Each time you press the button, the unit tunes in the next
preset station.

Adjust the sound level by rotating VOLUME on
the front panel (or by pressing or -
on the remote control) repeatedly.

To Clear Stored Radio Stations

Press FM/AM on the remote control or on the
front panel until the frequency band appears on
the display and TV screen.

Use

on the remote control to select a

desired station.

Press CLEAR on the remote control to delete
the stored radio station.

ote

To CLEAR function is not available in Record or
Record Pause mode.

- - - - - - - RADIO - - - - - - - 1/6.

FM 87 . 7MHz

FM 108 . 0MHz
FM 90 . 7MHz
FM 106 . 7MHz

ADD : MEMORY

FM/AM

DEL : CLEAR

FM 98 . 7MHz

- - - - - - - RADIO - - - - - - - 2/6.

FM 87 . 7MHz

FM/AM

- - - - - - - RADIO - - - - - - - 2/6.

FM 87 . 7MHz

ADD : MEMORY

FM/AM

FM 108 . 0MHz

DEL : CLEAR

- - - - - - - RADIO - - - - - - - 1/6.

FM 87 . 7MHz

FM 108 . 0MHz
FM 90 . 7MHz
FM 106 . 7MHz

ADD : MEMORY

FM/AM

DEL : CLEAR

FM 98 . 7MHz

- - - - - - - RADIO - - - - - - - 2/6.

FM 87 . 7MHz

ADD : MEMORY

FM/AM

FM 108 . 0MHz

DEL : CLEAR

- - - - - - - RADIO - - - - - - - 2/6.

FM 87 . 7MHz

FM/AM

Need help? Call

1-800-813-3435

Summary of Contents for DWM-3900















































Search results

Summary of Contents for DWM-3900

Reviews:

Related manuals for DWM-3900

Brands by name

Popular brands

Sanyo DWM-3900, Instruction Manual

Search results

Summary of Contents for DWM-3900

Reviews:

Related manuals for DWM-3900

Brands by name

Popular brands