12
Connections (Continued)
Basic TV Connections
Make one of the following connections, depending on
the capabilities of the equipment to be connected.
RF coaxial connection
Connect the ANTENNA/CABLE OUT jack on the DVD &
Hi-Fi Home Theater to the ANTENNA in jack on the TV
using the 75-ohm Coaxial Cable supplied
(R)
.
ote
If you use this connection, tune the TV to the DVD & Hi-
Fi Home Theater’s RF output channel (CH 3 or 4).
How to set the DVD & Hi-Fi VCR Home Theater’s RF
output channel
1.
While the DVD & Hi-Fi VCR Home Theater is turned
off, press and hold TUNING (
v
/
V
) on the front panel
for about five seconds.
The unit will turn itself on and “RF-03” or “RF-04” appears in
the display window.
2.
Use TUNING (
v
/
V
) on the front panel to change the
RF output channel (CH 03 or CH 04).
3.
Turn the unit off and then on.
4.
Set the TV’s CH to 3 or 4 (depending on the RF
output channel you selected) to view this system on
your TV.
Video connection
Connect the MONITOR OUT jack on the DVD & Hi-Fi
VCR Home Theater to the VIDEO IN jack on the TV
using the video cable supplied
(V)
.
ote
If you use this connection, set the TV’s source selector to
VIDEO.
S-Video connection
Connect the S-VIDEO OUT jack on the DVD & Hi-Fi
Home Theater to the S-VIDEO IN jack on the TV using
the optional S-Video cable
(S)
.
Component Video (Color Stream
®
) connection
Connect the COMPONENT VIDEO OUT jacks on the
DVD & Hi-Fi VCR Home Theater to the corresponding
IN jacks on the TV using an optional Y Pb Pr cable
(C)
.
Progressive Scan (ColorStream
®
pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD & Hi-
Fi VCR Home Theater’s progressive scan output for
the highest video resolution possible.
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled if you try
Progressive Scan on the DVD & Hi-Fi VCR Home
Theater.
Connect the COMPONENT VIDEO OUT jacks on the
DVD & Hi-Fi VCR Home Theater to the corresponding
IN jacks on the TV using an optional Y Pb Pr cable
(C)
.
ote
Set the Progressive option to “On” in the Setup menu
for a progressive signal, see page 20.
ANTENNA
FM
GND
AM
S-VIDEO OUT
IN
OUT
ANTENNA/CABLE
SPEAKERS
FRONT
(R 4 )
(R 4 )
REAR
CENTER
( 4 )
REAR
(L 4 )
FRONT
(L 4 )
SUB
WOOFER
( 8 )
VIDEO
MONITOR COMPONENT
VIDEO OUT
OUT
VIDEO
Y
Pb
Pr
AUDIO
1
L
R
L
R
AUDIO INPUT
VIDEO
INPUT
ANTENNA
INPUT
V
S
R
Rear of TV
Rear of DVD & Hi-Fi VCR Home Theater
S-VIDEO
INPUT
Y
Pb
Pr
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
C
(DVD ONLY)
Need help? Call
1-800-813-3435
