background image

4

Overview

Notes on Recording

•  The recording times shown are not exact because the DVD Recorder uses variable bit-rate video

compression. This means that the exact recording time will depend on the material being recorded.

•  When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording

times may be shorter.

•  Discs recorded at high speeds (equal to or greater than 2X) may not be recognized.
•  If you record still pictures or audio only, the recording time may be longer.
•  The displayed times for recording and time remaining may not always add up to the exact length of the

disc.

•  The available recording time may decrease if you heavily edit a disc.
•  When using a DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before

you start a recording session, check the amount of recording time left on the disc.

Recording TV Audio Channels

The DVD Recorder can record one or two channel audio. For TV broadcasts, this usually means mono or
stereo, but some programs are broadcast in bilingual audio channel. You can record either BIL I, BIL II or both.

Restrictions on Video Recording

• You cannot record copy-protected video using this DVD Recorder. Copy-protected video includes DVD-Video

discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording
will pause or stop automatically and an error message will be displayed on-screen.

• Video that is ‘copy-once only’ can only be recorded using DVD+RW discs with CPRM.

Copyright Notice

•  Audio and video recordings you make using the DVD Recorder are for your personal use only. You may not

sell, lend, or rent them to other people.

•  This product incorporates copyright protection technology that is protected by method claims of certain

U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
corporation. Reverse engineering or disassembly is prohibited.

Handling the Unit

When shipping the unit

The original shipping carton and packing materials come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products
in contact with the unit for a long period of time. They will leave marks on the surface.

Precautions

About DVD Recording

DW-T76E2D-HR-O(GB)  2007.3.12 4:32 PM  ˘

` 4   mac001  1200DPI 90LPI

Summary of Contents for DVR-DX600



























































Reviews: