−
10
−
9. Press the CUE ([
]) key to display the confirmation (YES/
NO input) screen, and then use the [
] key or the [
]
key to select "YES".
10. Press the CUE ([
]) key.
•
"WRITING NEW FIRMWARE!!", "DO NOT REMOVE
CARD!" AND "DO NOT POWER OFF!" will be
displayed on the screen. Overwriting of the sub
microprocessor will start and the front LED will flash.
•
The update is completed once the device has re-
started twice. (After the device powers down and
automatically restarts twice.)
Note:
When the unit restarts, the "SANYO" logo and the messages
"HARD DISK CHECKING!!" and "DO NOT POWER OFF" will
be displayed, and you must never turn the power off while
they are being displayed. If the power is turned off at this
time, the HDD may become damaged.
3-7. OVERWRITING THE FIRMWARE
1. Prepare the CompactFlash card containing the firmware to
be overwrite and a USB connection-type CompactFlash
card reader.
2. Insert the CompactFlash card containing the firmware to
be overwrite into the card reader, and connect the card
reader to the unit's USB connector.
3. Turn on the power for the unit.
4. Press the MENU key to display the "MAIN MENU" screen.
5. Use the [
] key or the [
] key to move the cursor to "8.
POWER LOSS/USED TIME" and then press the CUE ([
]) key to display the "POWER LOSS/USED TIME" screen.
6. Press the [
] key until the cursor is displayed.
7. Press the [
] key to move the cursor to the line where
the version number appears, and then press the CUE
([
]) key to display the "FIRMWARE UPDATE" screen.
8. Use the [
] key or the [
] key to move the cursor to
"MAIN & SUB COMPUTER".
< POWER LOSS/USED TIME >
# 010 02-03 03:42 02-03 17:59
POWER LOSS RECOVER
USED TIME DISK1 USE : 00000H
DISK2 USE : 00000H
FIRMWARE : MAIN 1.05-00 / SUB 1.05-00
POWER : 00000H
02-03 03:33 02-03 03:34
02-02 05:43 02-03 03:32
02-01 16:06 02-01 20:59
< POWER LOSS/USED TIME >
# 010 02-03 03:42 02-03 17:59
POWER LOSS RECOVER
USED TIME
DISK1 USE : 00000H
DISK2 USE : 00000H
FIRMWARE : MAIN 1.05-00 / SUB 1.05-00
POWER : 00000H
02-03 03:33 02-03 03:34
02-02 05:43 02-03 03:32
02-01 16:06 02-01 20:59
ERROR RESET # : 0000 0000
< FIRMWARE UPDATE >
MOVE LINES WITH
↓↑
, SELECT WITH
←→
MAIN MICRO COMPUTER
MAIN & SUB COMPUTER
SUB MICRO COMPUTER
< FIRMWARE UPDATE >
MOVE LINES WITH
↓↑
, SELECT WITH
←→
MAIN MICRO COMPUTER
MAIN & SUB COMPUTER
SUB MICRO COMPUTER
< FIRMWARE UPDATE >
DO YOU UPDATE FIRMWARE?
YES
CHANGE WITH
↓↑
, SET WITH
→
MAIN & SUB COMPUTER
Summary of Contents for DSR-M814
Page 3: ... 3 ...
