background image

SEARCHING FOR RECORDED VIDEO

5

34

English

OPERATION

Use the following procedure to playback video that has 
been stored in the archive area.

1

Press the [SEARCH] button while the 
digital video recorder is recording or 
stopped.

The SEARCH indicator lightsup and the <SEARCH> 
screen is displayed.

2

Turn the jog dial to select “ARCHIVE 
AREA SEARCH”.

3

Turn the shuttle dial clockwise.

The <ARCHIVE AREA SEARCH> screen is displayed.
This screen lists the eight most-recent recordings in the 
order in which archiving was performed.

(1) NO: Indicates the archive number.
(2) DATE: Indicates the date of recording.
(3) START: Indicates the start time for the recording.
(4) CH: Indicates the channel (or camera number) for the 

recording.

(5) TOTAL: Indicates the total capacity of the archive 

area.

(6) USED: Indicates the amount of the archive area that 

has been used.

4

Turn the jog dial to select the video for 
playback.

The selected image is displayed on the preview screen.

z

To display the next or previous recording

Turn the jog dial clockwise or counter-clockwise 
accordingly.

z

Up to eight recordings can be displayed in the 
<ARCHIVE AREA SEARCH> screen.

z

To leave search mode

Press the [SEARCH] button. SEARCH indicator turns 
off.

5

Turn the shuttle dial clockwise.

The selected recording is played back on the full screen.

By setting the motion sensor for recordings from the 
normal recording area (i.e., normal recordings and timer 
recordings) or alarm recording area, variations from these 
recordings as a result of the presence of an intruder or the 
like can be detected, and the corresponding video can be 
played back.

z

When a camera number (or channel) is specified, 
searching will only be carried out for that camera.

1

Press the [SEARCH] button while the 
digital video recorder is recording or 
stopped.

SEARCH indicator lights up and the <SEARCH> screen is 
displayed.

Archive area search

SEARCH

                    <SEARCH>
       ALARM SEARCH                  ->
       ALARM THUMBNAIL SEARCH        ->
       TIME/DATE SEARCH              ->
       ARCHIVE AREA SEARCH           ->
       MOTION DETECTION SEARCH       ->

            MOVE:JOG  SELECT:SHUTTLE 

             <ARCHIVE AREA SEARCH>
  NO   DATE  START  CH       CAPACITY 
  0001 01-01 01:48  1      TOTAL  -  816MB
  0002 01-05 09:53  1      USED   -   16MB
  0003 01-01 02:41  1
  0004 01-02 03:10  1
  0005 01-02 04:25  1
  0006 01-04 02:40  1
  0007 01-04 01:25  1
  0008 01-04 01:25  1
           MOVE:JOG   SELECT:SHUTTLE 

(5)

(6)

(1)

(3)

(2)

(4)

Motion detection search

SEARCH

e00_l8hbg_us_7.book  Page 34  Thursday, November 25, 2004  1:44 PM

Summary of Contents for DSR-3709































































































































Reviews: