5
En
g
lish
POSITIONING THE LCD HDTV
Always use a firm-flat surface when positioning
your HDTV. Do not position the unit in a confined
area. Allow adequate space for proper ventilation.
CAUTION INSTALLING STAND
Handling by two people is recommended when
installing.
When holding (moving or lifting) the LCD Display,
hold the display’s body. Do not handle the LCD TV
by holding the attached accessory parts (speakers),
otherwise it may result in damage
Before installing, provide a desk (or a part of it)
which is strong enough to support the weight of the
LCD TV and its stand. The desk must be larger than
the LCD Display’s screen size. The desk’s surface
must be flat and covered with soft material (such as
a blanket) for protecting the screen surface.
Before putting the LCD Display on the desk, make
sure there is no object on it. Leaving any object
under the screen may cause damage on the screen.
The LCD TV with this stand should be installed
on a flat and level place. Do not place it on non
flat, unlevel or unstable cart or stand. The display
may fall, causing not only serious damage to the
products but serious injury to a person.
For correct installing, mounting and uninstalling of
the LCD TV Stand, it is strongly recommended to
use a trained, authorized dealer. Failure to follow
correct procedures could result in damage to the
equipment or injury to the installer.
Installing Stand
1
Place the LCD TV on a flat surface place where
maintained with soft materials (such as a blanket) for
protecting the display screen.
2
Secure the stand to the TV with 4 screws.
4
4
1
1
2
2
3
3
32"
INSTALLATION
4
4
1
1
2
2
3
3
46"
Warning
To prevent injury, this apparatus must be securely at-
tached to the floor / wall in accordance with the insta-
lation instructions.
This TV could fall over if it is pushed , pulled or knocked
down. Use the screw to secure TV to the furniture
Screw type:
20
screw
Uninstalling Stand
1
Place the LCD TV screen facing down on a flat
surface with soft materials (such as a blanket) for
protecting the display screen.
2
Remove screws in 4 holes with screw driver.
4
1
2
1
2
3
32"
4
4
1
1
2
2
3
3
46"
