16
QuickTips
If you don’t recognize
words in the on-screen
menu, change the
menu option language
or press the remote
control RESET key
twice (personalized
settings will be reset to
factory defaults).
The CH MAP remote
key will only operate
the Sanyo Digital Box.
Need help?
Visit our Web site at
www.sanyoctv.com
SDB Menu Operation—Picture
Selecting the Menu Language
All menu Categories, Features, and Options will appear in the
language you choose. English is the default language.
1. Use the
/
keys to highlight the
Menu Language
feature.
2. Press the right
key.
3. Use the
/
keys to highlight a language option: English,
Español, or Français. Press the
ENTER
key.
NOTE:
The menu language does not affect the Captioning text
language.
System Information
This feature is designed for use by the factory and/or service
personnel. The display is for diagnostic purposes only, there are no
customer adjustments.
Figure 37—System Information
Figure 36—Menu Language
The SDB automatically displays the CHannel Map in columns regardless of the total number of channels. Rows
will vary based on the number of channels received. If the CHannel Map page is longer than the screen display,
simply use the cursor keys to scroll as needed. Also, this feature can be used as an express selection process to
access channel numbers, see page 17.
The SDB Channel NightScan feature searches for new channels and adds them to the channel database. This
operation will be performed at random intervals during in-active times. This feature automatically updates only
DTV channels.
The CHannel Map display depends on the following conditions:
— If channel signals are not detected, the Map page for that
category (DTV or NTSC) will be blank.
— The NTSC CHannel Map page will display either CATV
channels or Off-Air channels but not both. During channel
search, the SDB will scan both types. The SDB will automati-
cally detect the proper type to be displayed and used for the
NTSC database (for a maximum of 125 cable channels or a
maximum of 68 VHF/UHF channels [VHF 2-13,
UHF 14-69]). (NTSC channels depend on the type of signal
connected to the NTSC RF input.)
— When the CHannel Map is displayed on the screen, you can
press the
TUNER
key to switch between the categories.
— DTV channels will show only the major channel number.
Figure 39—DTV CH Map
Channel Map
