F18
9
F17
- MP3/WMA
1. Press the REPEAT button once , then REPEAT is displayed. It will play the current track repeatedly.(F14)
2. Press the REPEAT button twice, REPEAT ALL is displayed. It will play all tracks repeatedly.(F15)
3. Press the REPEAT button thrice, then REPEAT ALBUM is displayed. It will play repeatedly the current
album. (F16)
4. Press the REPEAT button four times, then REPEAT function will be off.
F14
F15
F16
RANDOM PLAY(on the remote control)
INTRO PLAY(on the remote control)
1. Press the RANDOM button once , and then RANDOM is displayed.(F17)
2. Press the RANDOM button once again, and then resume to normally play.
1. Press the INTRO button once, and then INTRO is displayed. The main unit will play the first 10 seconds of
each track.(F18)
2. Press the INTRO button twice, and then resume to normal play.
PROGRAM MODE
User can make the program up to 32 tracks in CD mode or 64 tracks in MP3/WMA/USB/SD CARD mode in any
desired order. Program mode is activated while in stop mode.
1. How to play the program
- CD
1) Press the iPod/MEM/C-ADJ. button, shift to PROGRAM mode.(F19)
2) Press the SKIP/TUNER SEARCH(UP or DOWN) button, the track number will be changed.
3) Press the iPod/MEM/C-ADJ. button to confirm the track number.
- MP3/WMA/USB/SD CARD
1) Press the iPod/MEM/C-ADJ. button, shift to PROGRAM mode. The album number is flashing. (F20)
2) Press the PRESET/FOLDER button, the album number will be changed.
3) Press the iPod/MEM/C-ADJ. button , the track number is flashing.(F21)
4) Press the SKIP/TUNER SEARCH button, the track number will be changed.
5) Press the iPod/MEM/C-ADJ. button to confirm the track number.
F21
F19
F20
2. PROGRAM PLAY
Press the PLAY/PAUSE/ENTER button on the unit (or remote control), it will be play starting with the first track
of the program. When all tracks have been played, the unit display will show the number of tracks and the playing
time of the CD/MP3/WMA tracks.
3. CANCEL PROGRAM
1. Press the STOP button twice, or open the CD tray door and close it again then the memory will be erased.
2. Set a new program, the existing one will be cleared.
