background image

THE SANYO COMFORT WARRANTY

[ E 8 4 ]   A d d i t i o n a l  I n f o r m a t i o n  

ORIGINAL RETAIL 
PURCHASER'S RESPONSIBILITY

You, the original retail purchaser, must present 
your original, dated bill-of-sale together with 
this warranty to SANYO Canada Inc. or to an 
authorized Sanyo Service Depot when you make 
a claim under this warranty.
You, the original retail purchaser, are responsible 
for any costs of TRANSPORTING the product to 
and from SANYO Canada Inc. or an authorized
Sanyo Service Depot. You also are responsible 
for the cost of any MAINTENANCE necessary in 
respect of the product.

WARRANTY BECOMES VOID

This warranty becomes void if the product's 
serial numbers are altered or removed or if any 
repair to the product is made other than by 
SANYO Canada Inc. or by an authorized Sanyo 
Service Depot.

LIMITATIONS

(a).SANYO Canada Inc. reserves the right to 

change or improve the design of the model 
of the product warranted hereunder 
without incurring any obligation to make 
any modifications to or to install any 

improvement in or on the product.

(b).In no event shall SANYO Canada Inc. or any 

of its Authorized Dealers be liable for 
special or consequential damage arising 
from the use of this product.

STATUTORY WARRANTIES

The above provisions do not preclude the 
operation of any applicable provincial statute 
which in certain circumstances may not allow 
some of the limitations and exclusions described
in this Warranty. Where any terms of this 
Warranty are prohibited by such a statute, they 
shall be deemed null and void but the remainder 
of this warranty shall remain in effect.

HOW TO OBTAIN WARRANTY 
SERVICE

Please contact the Sanyo Authorized Dealer 
from whom the product was purchased, or 
contact us directly at:

SANYO Canada Inc.

1-300 Applewood Cres.

Concord, Ont. L4K 5C7

(905) 760-9944

1-800-263-2244

UP383BA_0.book  Page 84  Thursday, May 26, 2005  10:48 AM

Summary of Contents for CLT-E23

























































































Reviews: