manualshive.com logo in svg

Sanyo CLT-D5880, Instruction Manual

Share
Download
Sanyo CLT-D5880 Instruction Manual Download Page 23

E21

USING 

THE INTERFACE

Global Setup

If you change one of the global settings, you change that setting for all
registered handsets. Only one handset can change global settings at a time.

Setting Day and Time

Day & Time sets the day and time of your display.

1

Press the 

MENU

soft key. Select the Global Setup

menu, and then the Day & Time submenu option.

2

Press 

VOL/

▲

or 

VOL/

▼

to select the day of the

week, and then the 

/

/

soft key.

3

Press 

VOL/

▲

or 

VOL/

▼

to set hour, and then press the 

/

/

soft key.

4

Press 

VOL/

▲

or 

VOL/

▼

to set minute, and then press the 

/

/

soft key.

5

Press 

VOL/

▲

or 

VOL/

▼

to choose 

AM

or 

PM

, and then press the 

SAVE

soft

key. You will hear a confirmation tone.

Setting CIDCW (Caller ID on Call Waiting)

Caller ID on Call Waiting (CIDCW) displays the name and number of an
incoming call while you are on the line. Call Waiting Deluxe (CWDX) allows
you to handle call waiting calls in seven different ways.

1

Press the 

MENU

soft key. Select the Global Setup

menu, and then the CIDCW submenu.

2

Press 

VOL/

▲

or 

VOL/

▼

to select 

CW On

/

CWDX On

, 

CW On

/

CWDX Off

,

or 

CW Off

/

CWDX Off

, and then press the 

OK

soft key. You will hear a

confirmation tone.

      D a y   &   T i m e
 

 

M O N   1 2 : 0 0   A M

          [   /   ]

BACK

SAVE

          C I D C W
C W   O n   / C W D X   O n

C W   O n   / C W D X   O f f

BACK

D E L E T E

OK

• For setting the Day and Time, the idle time-out is extended to 2 minutes.

Note:

UP800DH(CLT-D5880) OM  1/24/06  3:38 PM  Page 21

Summary of Contents for CLT-D5880





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands