manualshive.com logo in svg

Sanyo CLT-D5880, Instruction Manual

Share
Download
Sanyo CLT-D5880 Instruction Manual Download Page 16

E14

USING 

THE INTERFACE

Your phone has five main menu options: 

Walkie-Talkie Mode, Room/Baby

Monitor, Handset Setup, Global Setup

and 

Deregister HS

.

Default Settings

The default settings set from the factory match the features that most people
use. You may not need to change them. However, there are a number of
options you must set and entries you must make in memory to take full
advantage of all the phone features. The table below lists the default settings.

USING 

THE INTERFACE

Main Menu Options

Edit Voice Mail

None

Ringer Tone

Flicker

Distinctive Ring

On

Automatic Talk (Auto Talk)

Off

Anykey Answer

Off

Banner

"  "

Language

English

Contrast

level 5

Key Touch Tone

On

Animation Screen

On

Day & Time

SUN 12:00 AM

CIDCW

CW on/CWDX off

Area Code

None

Dial Mode

Tone

Voice Mail Tone

On

Function

Default Settings

• For Global Setup and Deregister HS menu options, make sure the line is not in use and

the handsets are within range of the base.

• Main menu flow chart is provided on page E57.

Notes:

UP800DH(CLT-D5880) OM  1/24/06  3:38 PM  Page 14

Summary of Contents for CLT-D5880





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands