E4
To telephone outlet
To TEL LINE
To DC IN 9V
AC adaptor
(supplied)
Telephone line cord
(supplied)
To AC outlet
2
3
When connecting the power cord, make sure it does not create a
trip or fire/electrical hazard. Avoid places where it could become
chafed.
1
Snap the bottom bracket into the notches on the base.
2
Connect the AC adaptor to the
DC IN 9V
jack and to a standard 120V
AC wall outlet. Then raise the antenna to a vertical position.
3
Connect the telephone line cord to the
TEL LINE
jack and to a tele-
phone outlet.
1
Connections
▼
Connect the base unit
1
Snap the bottom bracket into the notches on
the base.
2
Plug the telephone line cord to the
TEL LINE
jack and the AC adaptor to the
DC IN 9V
jack.
3
Plug the telephone line cord into the tele-
phone outlet.
4
Fit the AC adaptor cord into the molded chan-
nel. Then wrap the cord around the strain
relief notch.
5
Plug the AC adaptor into a standard 120-V AC
wall outlet.
6
Raise the antenna to a vertical position.
7
Align the mounting holes on the base with the
mounting posts on the wall plate. Push in and
down until the phone is firmly seated.
1
2 - 7
Use only the AC adaptor that is sup-
plied with your phone.
Mounting the base unit on a wall
▼
Standard wall plate mounting
This phone can be mounted on any standard tele-
phone wall plate.
CLT9930 (SANYO) A5 2nd 6/27/00 6:42 PM Page 5
