manualshive.com logo in svg

Sanyo CLT-9839, User Manual

Share
Download
Sanyo CLT-9839 User Manual Download Page 5

E9

E8

Installation

DIALING SYSTEM

Set the TONE-PULSE select switch on the base station
to the dialing system used in your home (touch-tone or
pulse). If you do not know which system is in use, ask
your telephone company.

BACKUP BATTERY INSTALLATION

This cordless telephone has a power-failure battery backup system. With four AA
alkaline batteries properly installed, the backup system allows you to use both handset
and base station during a power interruption for up to 20 hours in standby mode or up
to 8 hours in talk mode. See page E42 for more details.

1

Make sure that the base station is connected to AC
power.

2

Open the battery cover on the bottom of the base station.

3

Insert four AA batteries (not supplied).

Match the polarities (+ and – signs) of the batteries
to the polarities shown inside the battery compartment.

4

Close the battery cover.
Make sure the P.BACK UP indicator lights.
During a power interruption, the P.BACK UP indicator
flashes to indicate the battery power is being used.

TONE  PULSE

Installation

BASE UNIT LOCATION

Avoid places near electrical equipment such as refrigerators, computers, TVs or
fluorescent lamps. These may cause interference or reduce the operating range of
the cordless telephone.

CONNECTIONS

1

Insert the small plug of the AC adaptor into the DC 12V  jack provided on the back
of the base station.

2

Plug the AC adaptor into an AC 120V wall outlet.

3

Insert one plug of the telephone cord into a wall telephone jack (modular type) and
the other into the TEL LINE jack on the base station.

4

Wind any excess length of the telephone cord around the cord holder on the back
of the base station.

Note

If you move the CLT-9839 to another location, connect it in the correct order as above.

4-Pronged Jack
If you have a 4-pronged jack, use a modular 4-pronged adaptor (not supplied).

Direct Wire Connection
If your current phone is wired directly into the wall, have the phone company install a
modular wall phone jack.

Party Line or Pay Phone
If you have a party line or a pay phone, telephone companies do not allow the installation
of cordless telephones, because they will not work correctly with these systems.

2

3

AC wall outlet

Wall telephone jack

DC 12V

1

TEL LINE

3

Telephone cord

➁

➀

➁

➀

Summary of Contents for CLT-9839


























Reviews:

No comments

Brands by name

Popular brands

Load more brands