Operation with the Remote Control Unit (continued)
2. Manual Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit do not meet your needs,
press the setting buttons as described below and change the settings as
desired.
STEP 1
Press the MODE selector button and select the desired
mode.
For heating operation
→
For dehumidifying operation
→
For cooling operation
→
For circulating operation
→
STEP 2
To
start
the
air
conditioner,
press
the
ON/OFF
operation button.
STEP 3
Press
the
TEMP.
setting
buttons
to
change
the
temperature setting to the desired temperature.
Adjustable temperature range:
88 °F max.
60 °F min.
NOTE
The temperature setting changes by one degree each
time the button is pressed. It is not possible to change
the temperature setting when the unit is operating in the
fan mode. (The air conditioner remembers the new
temperature setting even when it is turned off.)
STEP 4
Press the FLAP button and set the airflow direction as
desired.
(Refer
to
‘‘Adjusting
the
Airflow
Direction’’
on
page 23.)
To stop the air conditioner, press the ON/OFF operation button again.
1HR.
TIMER
ON
OFF
TEMP.
FAN SPEED MODE
ON
OFF
SET
CANCEL
NIGHT
SETBACK
SET TEMP.
FLAP
STEP 1
STEP 4
STEP 3
STEP 2
STEP 5
16
OI-202-16EG
oi202000
